Untitled Document
 
Untitled Document
 
You may need to enable or update / install Adobe Flash Player Plug-in to display JPE e-Book in your device properly. If you use Google Chrome, please find information here
> Archives > Current Issues
JPE, Vol. 19, No. 1, January 2019
EMI Prediction and Reduction of Zero-Crossing Noise in Totem-Pole Bridgeless PFC Converters
Baihua Zhang, Qiang Lin, Jun Imaoka, Masahito Shoyama, Satoshi Tomioka, and Eiji Takegami
Area Power Quality and Utility Application
Abstract In this study, a zero-crossing spike current issue in a totem-pole bridgeless power factor correction (PFC) converter is comprehensively investigated for the first time. Spike current occurs when input voltage crosses zero, becomes a noise source, and causes severe common mode emission issues. A generation mechanism for electromagnetic interference (EMI) is presented to investigate the EMI problem caused by zero-crossing issue, and a noise spectrum due to this issue is predicted by a theoretical analysis based on the Fourier coefficient of an approximate spike current waveform. Furthermore, a noise reduction method is proposed and then improved to reduce the spike current. Experimental measurements are implemented on a GaN-based totem-pole bridgeless PFC converter, and the spike current can be effectively suppressed through the proposed method. Furthermore, the noise spectrums measured without and with the reduced zero-crossing spike current are compared. Experimental results validate the analysis of the noise spectrum caused by the zero-crossing spike current issue.
Keyword Conducted noise,Noise spectrum,Spike current,Totem-pole bridgeless PFC converter,Zero-crossing
PDF
Untitled Document