Performance Evaluation of 2-Dimensional Light Source using Mercury-free Flat Fluorescent Lamps for LCD Backlight Applications


Vol. 9, No. 2, pp. 164-172, Mar. 2009
10.6113/JPE.2009.9.2.164


PDF    

 Abstract

Recently, 2-dimensional flat light sources have been attracting much attention for its use in LCD backlight applications because of its high luminous efficiency and uniformity. A long-gap discharge, mercury-free flat fluorescent lamp has been developed, which shows a high brightness (>5000 cd/m2) and high luminous efficacy (60 lm/W). Additionally, it has a wide operating margin and stable driving condition with the aid of an auxiliary electrode. For driving the lamp, a narrow pulse power to maintain the glow discharge state is required. Since there has been no research for this kind of lamp driving, this paper proposes a newly developed short-pulse, high-voltage lamp-driving scheme. The proposed lamp system uses a ballast with a coupled-inductor in order to raise the short pulse voltage up to the lamp ignition level and to obtain energy-recovery action during the glow discharge mode. The operation principles are presented and also the system performances such as the lighting efficiency, spatial and angular uniformities are evaluated by hardware experiments. The results show that the proposed lighting system is a good candidate for the next-generation of LCD backlight systems.


 Statistics
Show / Hide Statistics

Cumulative Counts from September 30th, 2019
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.



Cite this article

[IEEE Style]

J. Park, B. Cho, J. Lee, K. Whang, "Performance Evaluation of 2-Dimensional Light Source using Mercury-free Flat Fluorescent Lamps for LCD Backlight Applications," Journal of Power Electronics, vol. 9, no. 2, pp. 164-172, 2009. DOI: 10.6113/JPE.2009.9.2.164.

[ACM Style]

Joung-Hu Park, Bo-Hyung Cho, Ju-Kwang Lee, and Ki-Woong Whang. 2009. Performance Evaluation of 2-Dimensional Light Source using Mercury-free Flat Fluorescent Lamps for LCD Backlight Applications. Journal of Power Electronics, 9, 2, (2009), 164-172. DOI: 10.6113/JPE.2009.9.2.164.