Design rule for fault‑tolerant converters of switched reluctance motors

Chenghui Fang; Hao Chen

Design rule for fault‑tolerant converters of switched reluctance motors

Chenghui Fang

Hao Chen

Vol. 21, No. 11, pp. 1690-1700, Nov. 2021

10.1007/s43236-021-00306-9

Fault Tolerance

Connection matrix

Converter

Switched reluctance motor

Abstract

To enhance the reliability of converters, many fault-tolerant converters have been proposed in the literature. However, the design rule is seldom proposed. The converter is usually a switch circuit that can be described by the matrix; therefore, the design of a fault-tolerant converter can be transformed to the matrix design. The fault tolerance of a circuit is mainly determined by its alternative loops. In this study, minus-1 Boolean determinant is defined to establish a relationship between the matrix and the alternative loop. Then, the following proposition is proven: for a connection matrix of a circuit, the minus-1 Boolean determinant represents the sum of loops in the circuit, where each term of the minus-1 Boolean determinant represents a loop of the circuit. The asymmetric half bridge converter is the most commonly used converter of the switched reluctance motor (SRM). According to its connection matrix, its candidate fault-tolerant converters are listed, and with the proposition, their alternative loops are obtained, their fault tolerance performance is evaluated, and the optimal one is selected. Furthermore, the fault tolerance performance of the derived converter is tested by simulations and experiments on a 12/8 SRM.

Statistics

Show / Hide Statistics

Cumulative Counts from September 30th, 2019
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.

Cite this article

[IEEE Style]

C. Fang and H. Chen, "Design rule for fault‑tolerant converters of switched reluctance motors," Journal of Power Electronics, vol. 21, no. 11, pp. 1690-1700, 2021. DOI: 10.1007/s43236-021-00306-9.

[ACM Style]

Chenghui Fang and Hao Chen. 2021. Design rule for fault‑tolerant converters of switched reluctance motors. Journal of Power Electronics, 21, 11, (2021), 1690-1700. DOI: 10.1007/s43236-021-00306-9.