Online condition monitoring for DC‑link capacitors of motor drives under noise interference


Vol. 22, No. 7, pp. 1142-1153, Jul. 2022
10.1007/s43236-022-00426-w




 Abstract

In this paper, a capacitance estimation method based on the recursive least squares (RLS) algorithm is proposed for the condition monitoring of the dc-link capacitors in motor drive systems. When a system is operating in the regenerative mode, the capacitance can be estimated online without the need for hardware modifications. The ratio of the current integral to the voltage increase is used to estimate the capacitance. In addition, the influences of the dead-time and pulse dropping on calculating current integral are analyzed. To deal with noise interference in voltage measurement, the RLS algorithm with outlier detection is used to achieve robust capacitance estimation. In view of the limited amount of data in the regenerative mode, the standard deviation of the error was estimated and a reasonable threshold was set according to the accuracy requirement to remove a part of the estimated value with a large error, which improves the reliability of the estimated results. Simulation and experimental results show the effectiveness of this method.


 Statistics
Show / Hide Statistics

Cumulative Counts from September 30th, 2019
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.



Cite this article

[IEEE Style]

Q. Zhu, J. Zhao, Y. Song, Y. Zhou, J. Sun, "Online condition monitoring for DC‑link capacitors of motor drives under noise interference," Journal of Power Electronics, vol. 22, no. 7, pp. 1142-1153, 2022. DOI: 10.1007/s43236-022-00426-w.

[ACM Style]

Qi Zhu, Jin Zhao, Yujin Song, Yang Zhou, and Jiajiang Sun. 2022. Online condition monitoring for DC‑link capacitors of motor drives under noise interference. Journal of Power Electronics, 22, 7, (2022), 1142-1153. DOI: 10.1007/s43236-022-00426-w.