Optimal design of control loop parameters and impedance spike suppression for 400 Hz two‑module series structured inverters

Yihan Chen; Honghao Guo; Haixiao Ma; Hui Gao

Optimal design of control loop parameters and impedance spike suppression for 400 Hz two‑module series structured inverters

Vol. 24, No. 5, pp. 711-720, May 2024

10.1007/s43236-023-00746-5

Aviation static inverter

Small-signal modeling

Impedance modeling

Phase shift full-bridge converter

Abstract

The structure of a DC–DC converter connected in series with a 400 Hz inverter is widely used in aviation airborne and ground power systems to provide a medium-frequency AC power supply within a wide input voltage range. To guarantee the dynamic and steady-state performance of a multi-module series converter, it is necessary to individually optimize the control loop and the parameters of each series-connected module. In addition, it is also necessary to consider the input–output impedance matching issues of each converter. In this study, a phase-shifted full-bridge converter employing an average current control strategy is used as the input-side DC–DC converter, and a medium-frequency three-phase four-leg inverter is used as the output-side inverter. The study also conducts a small-signal modeling analysis to reveal the intrinsic relationship between the closed-loop output impedance of the input-side converter and the circuit parameters. It summarizes the optimization criteria for controlling the parameters of the voltage and current loops. By suppressing the peaks of the output impedance of the input-side converter, the impedance matching between the input- and output-side converters is ensured over the entire frequency range, ensuring the stable operation of the overall system. Finally, the correctness of the theoretical analysis is verified through simulation and experimentation.

Statistics

Show / Hide Statistics

Cumulative Counts from September 30th, 2019
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.

Cite this article

[IEEE Style]

Y. Chen, H. Guo, H. Ma, H. Gao, "Optimal design of control loop parameters and impedance spike suppression for 400 Hz two‑module series structured inverters," Journal of Power Electronics, vol. 24, no. 5, pp. 711-720, 2024. DOI: 10.1007/s43236-023-00746-5.

[ACM Style]

Yihan Chen, Honghao Guo, Haixiao Ma, and Hui Gao. 2024. Optimal design of control loop parameters and impedance spike suppression for 400 Hz two‑module series structured inverters. Journal of Power Electronics, 24, 5, (2024), 711-720. DOI: 10.1007/s43236-023-00746-5.