Diagnosis Methods for IGBT Open Switch Fault Applied to 3-Phase AC/DC PWM Converter


Vol. 12, No. 1, pp. 120-127, Jan. 2012
10.6113/JPE.2012.12.1.120


PDF    

 Abstract

Fault diagnosis technique of electrical drives is becoming more and more important, since voltage fed converter system has become industrial standard in many applications. Many studies have been conducted an inverter fault diagnosis for induction motors. However, there are few researches about fault diagnosis of 3-phase ac/dc PWM (Pulse Width Modulation) converter compared to the dc/ ac inverter. The ac/dc converter is the opposite of dc/ac inverter at current flow. Also, inverter and converter have different current patterns under the same condition of IGBT (Insulated gate bipolar transistor) open switch fault. Therefore, it is difficult to apply intact diagnosis methods of inverter to the converter. This paper proposes modified fault detection methods for IGBT open switch fault in 3-phase ac/dc PWM converter by modifying established fault diagnostic methods for dc/ac inverters.


 Statistics
Show / Hide Statistics

Cumulative Counts from September 30th, 2019
Multiple requests among the same browser session are counted as one view. If you mouse over a chart, the values of data points will be shown.



Cite this article

[IEEE Style]

W. Im, J. Kim, J. Kim, D. Lee, K. Lee, "Diagnosis Methods for IGBT Open Switch Fault Applied to 3-Phase AC/DC PWM Converter," Journal of Power Electronics, vol. 12, no. 1, pp. 120-127, 2012. DOI: 10.6113/JPE.2012.12.1.120.

[ACM Style]

Won-Sang Im, Jang-Sik Kim, Jang-Mok Kim, Dong-Choon Lee, and Kyo-Beum Lee. 2012. Diagnosis Methods for IGBT Open Switch Fault Applied to 3-Phase AC/DC PWM Converter. Journal of Power Electronics, 12, 1, (2012), 120-127. DOI: 10.6113/JPE.2012.12.1.120.