Fault‑tolerance operation analysis of multiphase interleaved inverters based on short‑circuiting windings
Han Fu Qikang Wei Hao Fu Bangyin Liu Shanxu Duan
Vol. 23, No. 1, pp. 1-10, Jan. 2023
10.1007/s43236-022-00500-3
Vol. 23, No. 1, pp. 1-10, Jan. 2023
10.1007/s43236-022-00500-3
A modular switched‑capacitor multilevel inverter featuring voltage gain ability
Yaoqiang Wang Juncheng Ye Ruohan Ku Yuchen Shen Gen Li
Jun Liang
Vol. 23, No. 1, pp. 11-22, Jan. 2023
10.1007/s43236-022-00508-9
Jun Liang
Vol. 23, No. 1, pp. 11-22, Jan. 2023
10.1007/s43236-022-00508-9
Novel double switch voltage‑lift Cuk converter
Master–slave modulated model predictive control to optimize current tracking for parallel cascaded H‑bridge power supplies
Bichen Yan Haihong Huang Haixin Wang
Vol. 23, No. 1, pp. 35-47, Jan. 2023
10.1007/s43236-022-00513-y
Vol. 23, No. 1, pp. 35-47, Jan. 2023
10.1007/s43236-022-00513-y
Analysis and implementation of passive soft switching snubber for PWM inverters
Power flow decoupling method of triple‑active‑bridge converter for islanding mode operation in DC microgrid systems
Kwabena Opoku Bempah Kyung-Wook Heo Jee-Hoon Jung
Vol. 23, No. 1, pp. 58-67, Jan. 2023
10.1007/s43236-022-00528-5
Vol. 23, No. 1, pp. 58-67, Jan. 2023
10.1007/s43236-022-00528-5
Single pulse width modulation for dual‑active‑bridge converters considering parasitic capacitance of MOSFETs
Seung Ho Lee Byung Ki Kim Sungmin Kim
Vol. 23, No. 1, pp. 68-78, Jan. 2023
10.1007/s43236-022-00544-5
Vol. 23, No. 1, pp. 68-78, Jan. 2023
10.1007/s43236-022-00544-5
Design of high efficiency phase‑shift full‑bridge converter with minimized power loss on primary‑side clamp diodes
Young-Eun Kwon Young-Woo Ju Da-un Kim Chong-Eun Kim
Vol. 23, No. 1, pp. 79-88, Jan. 2023
10.1007/s43236-022-00554-3
Vol. 23, No. 1, pp. 79-88, Jan. 2023
10.1007/s43236-022-00554-3
Novel high‑power triple line‑voltage cascaded unity power factor rectifier
Cong Wang Xia Liu Zhuang Li Hong Cheng Ting Chen
Jiayi Kong
Vol. 23, No. 1, pp. 89-101, Jan. 2023
10.1007/s43236-022-00572-1
Jiayi Kong
Vol. 23, No. 1, pp. 89-101, Jan. 2023
10.1007/s43236-022-00572-1
Sensorless control of printed permanent magnet synchronous motor
Integrated fault location method for distribution networks based on IACO‑PS
Shuqing Zhang Xiaowen Zhang Anqi Jiang Liguo Zhang Mingliang Li
Vol. 23, No. 1, pp. 112-126, Jan. 2023
10.1007/s43236-022-00505-y
Vol. 23, No. 1, pp. 112-126, Jan. 2023
10.1007/s43236-022-00505-y
Enhanced distributed secondary control method for DC microgrids against heterogeneous communication time delays
Estimation of remaining energy and available power for Li‑Ion battery packs considering energy consumption by heat convection
Yafeng Zheng Chunyu Wang Shijie Sang Suoqing Yu
Vol. 23, No. 1, pp. 139-148, Jan. 2023
10.1007/s43236-022-00523-w
Vol. 23, No. 1, pp. 139-148, Jan. 2023
10.1007/s43236-022-00523-w
Three‑mode one‑cycle controlled current‑source single‑stage multi‑input high‑frequency‑link inverter
Spread current spectrum method based on model predictive control with double sampling
Sanghun Han Seungil Choi Younghoon Cho
Vol. 23, No. 1, pp. 161-170, Jan. 2023
10.1007/s43236-022-00541-8
Vol. 23, No. 1, pp. 161-170, Jan. 2023
10.1007/s43236-022-00541-8