Switched‑capacitor‑based high‑gain DC–DC converter for fuel cell vehicle powertrain
Xiaogang Wu Jiulong Wang Yun Zhang Zhengxin Liu
Vol. 22, No. 4, pp. 557-568, Apr. 2022
10.1007/s43236-022-00388-z
Vol. 22, No. 4, pp. 557-568, Apr. 2022
10.1007/s43236-022-00388-z
High‑gain sparse three‑level indirect matrix converter and its modulation strategy
Rutian Wang Henan Hao Shuai Yuan Xinxin Hui
Vol. 22, No. 4, pp. 569-579, Apr. 2022
10.1007/s43236-022-00390-5
Vol. 22, No. 4, pp. 569-579, Apr. 2022
10.1007/s43236-022-00390-5
Model predictive current control of asymmetrical hybrid cascaded multilevel inverter
Jingang Han Pinxuan Zhao Gang Yao Hao Chen Yide Wang
Mohamed Benbouzid Tianhao Tang
Vol. 22, No. 4, pp. 580-592, Apr. 2022
10.1007/s43236-022-00389-y
Mohamed Benbouzid Tianhao Tang
Vol. 22, No. 4, pp. 580-592, Apr. 2022
10.1007/s43236-022-00389-y
A voltage‑fed single‑stage multi‑input inverter for hybrid wind/photovoltaic power generation system
Improved direct torque control strategy for reducing torque ripple in switched reluctance motors
Fan Yang Hao Chen Vitor Pires Joao Martins Yassen Gorbounov
Xiaodong Li Mohamed Orabi
Vol. 22, No. 4, pp. 603-613, Apr. 2022
10.1007/s43236-021-00380-z
Xiaodong Li Mohamed Orabi
Vol. 22, No. 4, pp. 603-613, Apr. 2022
10.1007/s43236-021-00380-z
Rotor winding inter‑turn short‑circuit fault detection in wound rotor induction motors using Wing Technique
Ujwala Vikas Dongare Bhimrao Sitaram Umre Makarand Sudhakar Ballal
Vol. 22, No. 4, pp. 614-628, Apr. 2022
10.1007/s43236-022-00382-5
Vol. 22, No. 4, pp. 614-628, Apr. 2022
10.1007/s43236-022-00382-5
Optimal strategy for energy management of DC multi‑microgrids considering power loss
Weiliang Zhang Hui Zhang Na Zhi Hanwei Wang
Vol. 22, No. 4, pp. 629-640, Apr. 2022
10.1007/s43236-021-00361-2
Vol. 22, No. 4, pp. 629-640, Apr. 2022
10.1007/s43236-021-00361-2
Analysis and design of composite‑structure resonant switched‑capacitor voltage equalization topology for series energy storage systems
Wubing Liao Yuanrui Chen Jun Zeng Xiaobin Hong
Vol. 22, No. 4, pp. 641-652, Apr. 2022
10.1007/s43236-021-00378-7
Vol. 22, No. 4, pp. 641-652, Apr. 2022
10.1007/s43236-021-00378-7
Design and analysis of mechanical flux‑weakening device of axial flux permanent magnet machines
Shaopeng Wang Jiawei Lu Bin Li Chengcheng Liu Youhua Wang
Gang Lei Youguang Guo Jianguo Zhu
Vol. 22, No. 4, pp. 653-663, Apr. 2022
10.1007/s43236-022-00386-1
Gang Lei Youguang Guo Jianguo Zhu
Vol. 22, No. 4, pp. 653-663, Apr. 2022
10.1007/s43236-022-00386-1
Practical power module implemented with bare dies on aluminum metal PCB substrate for AC‑to‑DC bridgeless dual‑boost power factor corrected rectifier
Indirect MPC method with improved output voltage and current waveforms for MMCs
Minh-Hoang Nguyen Sangshin Kwak Seungdeog Choi
Vol. 22, No. 4, pp. 674-684, Apr. 2022
10.1007/s43236-022-00384-3
Vol. 22, No. 4, pp. 674-684, Apr. 2022
10.1007/s43236-022-00384-3
Single‑wire power transfer method and verification
Yang Li Yu-jie Zhai Yao Li Xue-liang Wang Tao-cheng Hu
Vol. 22, No. 4, pp. 685-693, Apr. 2022
10.1007/s43236-022-00383-4
Vol. 22, No. 4, pp. 685-693, Apr. 2022
10.1007/s43236-022-00383-4
A lateral superjunction SOI LDMOS with double‑conductive channels
Weizhong Chen Haifeng Qin Xuwei Lin Yi Huang Zhengsheng Han
Vol. 22, No. 4, pp. 694-701, Apr. 2022
10.1007/s43236-022-00387-0
Vol. 22, No. 4, pp. 694-701, Apr. 2022
10.1007/s43236-022-00387-0
Operating area analysis and design of WPT systems with MEPT control
Weipeng Gao Yanfang Fan Chengxuan Wang Kangping Wang Hongchang Li
Vol. 22, No. 4, pp. 702-710, Apr. 2022
10.1007/s43236-022-00385-2
Vol. 22, No. 4, pp. 702-710, Apr. 2022
10.1007/s43236-022-00385-2
Analysis of dual‑input three‑port isolated DC–DC converter with bidirectional capability
Arulmozhi Subramanian Santha Karuppiah
Vol. 22, No. 4, pp. 711-726, Apr. 2022
10.1007/s43236-022-00408-y
Vol. 22, No. 4, pp. 711-726, Apr. 2022
10.1007/s43236-022-00408-y